Oil Cooler with DC Motor (12V-24V)

Dealer AKG oil coolers

Standard oil coolers with a 12 / 24V driven fan (D-series) are ideal for the most common mobile applications.

If desired, a serie with a bypass (DY-series) is available for applications with a high oil flow and / or very cold start-up conditions. The standard opening pressure is 2 bar (other pressures on request). It is also possible to use a thermal switch, in which the fan will start to run at the determined temperature.

Standard, this oil cooler has the ports on the side. This series is also available with the ports on the fan side (+AM).

If the dimensions do not suit the application, then the old series (TL-series) can offer a solution.

Oil Cooler with DC Motor (12V-24V)


If you are looking for another cooler, please contact us. Together we will look for a suitable solution.

AKG-Line D (standard)
AKG-Line D Oil cooler 12-24 DC motor

FEATURES OF THE AKG-Line D

  • 12 / 24 Volt motor powered fan.
  • These coolers are equipped with connections on the side.
  • High-Performance cooling assemblies.
  • The heat is transferred from the medium to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits.
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50% of antifreeze and anticorrosive additives [other media available at request].
  • Can be exposed to operating pressures of up to 26 bar.

AKG-Line DY (with bypass)
AKG-Line DY Oil cooler with bypass 12-24 DC motor

FEATURES OF THE AKG-Line DY

  • Oil cooler with BYPASS.
  • These coolers are equipped with connections on the side.
  • 12 / 24 Volt motor powered fan.
  • High-Performance cooling assemblies.
  • The heat is transferred from the medium to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits.
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50% of antifreeze and anticorrosive additives [other media available].
  • Can be exposed to operating pressures of up to 26 bar.

AKG-Line D + AM
AKG-Line D Oil cooler 12-24 DC motor

FEATURES OF THE AKG-Line D+AM

  • 12 / 24 Volt motor powered fan.
  • coolers with the connections on the fan side.
  • High-Performance cooling assemblies.
  • The heat is transferred from the medium to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits.
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50% of antifreeze and anticorrosive additives [other media available at request].
  • Can be exposed to operating pressures of up to 26 bar.

AKG-Line DY + AM (with bypass)
AKG-Line DY Oil cooler with bypass 12-24 DC motor

FEATURES OF THE AKG-Line DY+AM

  • Oil cooler with BYPASS.
  • coolers with the connections on the fan side.
  • 12 / 24 Volt motor powered fan.
  • High-Performance cooling assemblies.
  • The heat is transferred from the medium to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits.
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50% of antifreeze and anticorrosive additives [other media available].
  • Can be exposed to operating pressures of up to 26 bar.

AKG-Line TL (standard)
TL Oilcooler AKG

Features of the AKG-TL serie:

  • Cooling systems are made from Aluminium.
  • Fully tried and tested for arduous working conditions.
  • Ideal for mobile machines.
  • maximun working pressure 14 bar.
  • Offering a high flexibility for use in transmission, hydraulic, engine and lubrication oils.
  • Cooling systems can be fittid with 12 / 24 volt DC and 3 Phase motors.