Oil Cooler with AC Motor (400V)

Dealer AKG oil coolers

Standard oil coolers with a 400VAC driven fan (A-series) are ideally suited for the most common applications. If the noise level is an important issue, the low-noise version can offer a solution.

There are also a number of variants, suitable for the other applications.

For example, for a dusty environment there is a special series with with anti-clogging fins (AR series). This ensures that dust remains stuck less quickly, which ensures a higher cooling efficiency.

Furthermore, there is a serie with a bypass (AY-series) for applications with a high oil flow and / or very cold start-up conditions. The standard opening pressure is 2 bar (other pressures on request).

An offline application is also possible. For this there is an oil cooler (AP-series) which is equipped with an oil pump, which pumps the oil through the oil cooler. This is ideal, for example, cooling back an oil tank.

If the dimensions are not suiteable for the application, then the old series (T-series) can offer a solution.

Oil Cooler with AC Motor (400V)


If you are looking for another cooler, please contact us. Together we will look for a suitable solution.

AKG-Line A (standard)
AKG-Line A Oil cooler AC motor

FEATURES OF THE AKG-Line A

  • AC-motor 400 volt powered fan.
  • Can be exposed to operating pressures of up to 26 bar or 17 bar, depending on model.
  • High-Performance Aluminum "bar and plate" cooling assemblies.
  • The heat is transferred from the cooling medium to the ambient air.
  • These coolers can be used universallyfor hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits.
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50% of antifreeze and anticorrosive additives [other media available at request].
  • Noise-optimized models available [low-noise series].

AKG-Line AR (Dusty environment)
AKG-Line AR Oil cooler anti-clogging fins AC motor

FEATURES OF THE AKG-Line AR

  • The coolers are equipped with anti-clogging fins
  • 400 volt motor powered fan.
  • Can be exposed to operating pressures of up to 26 bar or 17 bar, depending on model
  • High-Performance cooling assemblies
  • The heat is transferred from the medium to be cooled to the ambient air
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50 per cent of antifreeze and anticorrosive additives [other media available]
  • Noise-optimized models available [low-noise series]

AKG-Line AY (with bypass)
AKG-Line AY Oil cooler with bypass ac motor

FEATURES OF THE AKG-Line AY

  • Oilcooler with BYPASS
  • AC-motor 400 volt powered fan.
  • Can be exposed to operating pressures of up to 26 bar or 17 bar, depending on model.
  • High-Performance Aluminum cooling assemblies.
  • The heat is transferred from the medium to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits.
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50 % of antifreeze and anticorrosive additives [other media available at request].
  • Noise-optimized models available [low-noise series].

AKG-Line AP (+hydropump)
AKG-Line AP Oil cooler with pump ac motor

FEATURES OF THE AKG-Line AP

  • 400 volt motor powered fan and hydro pump.
  • The heat is transferred from the medium to be cooled to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil and lubricating oil
  • For the cooling of HLP mineral oil to DIN 51524 and 100 cSt [other media and viscosity available at request]
  • Ambient temperature from -20 C up to +80 C
  • Max. oil temperature 80 C
  • Pump rated suction pressure 0,7 – 2 bar [0,5 bar when starting]
  • Largest and most comprehensive series of industrial coolers.
  • Filter optional = 20m filter unit
  • Filter bypass 2 bar.

ATEX Oil cooler AEX series
Atex oil cooler

Features of the ATEX oil cooler AEX series:

  • Cooler is equipped with an anti static fan.
  • Fan motor is provided with an ATEX-certification, depending on required classe.
  • High-Performance Aluminum cooling assemblies.
  • Can be exposed op to operating pressures of up to 26 bar or 17 bar, depending on model.

AKG-Line T (standard)

FEATURES:

  • High efficiency cooling system made of Aluminium.
  • High performance and working pressure - even for heavy duty hydraulic and lubrication applications.
  • Maximum working pressure: T1 - T8: 26 bar / T 9 - T11: 10 bar.
  • Offering high flexibility for usage with transmission, engine, hydraulic and lubrication oils.
  • May be also used as off-line coolers.
  • Cooling systems can be fitted with 12/24 V DC, 3 Phase or hydraulic motors.