AP60-40 oil cooler with pump 40cm³ AKG
AKG-Line AP (+hydropump)

FEATURES OF THE AKG-Line AP

  • 400 volt motor powered fan and hydro pump.
  • The heat is transferred from the medium to be cooled to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil and lubricating oil
  • For the cooling of HLP mineral oil to DIN 51524 and 100 cSt [other media and viscosity available at request]
  • Ambient temperature from -20 C up to +80 C
  • Max. oil temperature 80 C
  • Pump rated suction pressure 0,7 – 2 bar [0,5 bar when starting]
  • Largest and most comprehensive series of industrial coolers.
  • Filter optional = 20m filter unit
  • Filter bypass 2 bar.

PDF datasheet

Technical Data AP60-40 oil cooler with pump 40cm³ AKG

Oilflow (optimal) 60 L/min
Volume 13.2 liter
Weight 122 kg
Voltage 400 Volt / 50 Hz
Motor power 0.75/2.2 Kw
Engine speed 1500 rpm / 4 pole
Fan ø 600 mm
Airflow Sucking
Noise level 83 dB
Heat rejection < 37.4 kW

technical drawing AP60-40 oil cooler with pump 40cm³ AKG

Product codes AP60-40 oil cooler with pump 40cm³ AKG

  CCS no. AKG nr. (Old) AKG nr. (New)
AP60-40 Complete 2015.160.0000 1963.906.X084 1100895600
 
Cooler 6010.160.0000 1963.006.1X84 1100598700
Motor bracket 1400157400
Shroud 7410.040.0000 1963.006.4010 1500156100
Fingerguard 7610.050.0000 8402.077.0000 1500416900
Motor 7010.080.4001 8407.103.2307 1500442300
Fan 7250.060.0000 8400.325.0600 1500572800
Foot left 7810.220.1000 1963.302.7200
7810.220.2000 1963.302.7300

Description Value
COOLER_TYPE Pomp
Volume 13.2
Weight 122
Voltage 400
Frequency 50
Motor power 0,75/2,2
Engine speed 1500
poles 4
Low noise NO
Fan ø 600
Airflow Zuigend
Noise level 83
Heat rejection 70
Environment Default
Oilflow (optimal) 60
Connection Default
Manufacturer AKG
Nominal speed 1500