Oil Cooler with Hydraulic Motor

Dealer AKG oil coolers

Standard oil coolers with a hydraulically driven fan (H-series) are ideal for the most common industrial or mobile applications. The fan speed can be adjusted by means of the oil flow through the hydromotor. Sometimes this is desirable because of the noise level or the required cooling capacity.

There are also a few variants, suitable for the other applications.

For example, for a dusty environment there is a special series with with anti-clogging fins (HR series). This ensures that dust remains stuck less quickly, which ensures a higher cooling efficiency.

Furthermore, there is a serie with a bypass (HY-series) for applications with a high oil flow and / or very cold start-up conditions. The standard opening pressure is 2 bar (other pressures on request).

Oil Cooler with Hydraulic Motor


If you are looking for another cooler, please contact us. Together we will look for a suitable solution.

AKG-Line H Oil cooler hydraulic motor

FEATURES OF THE AKG-Line H

  • Can be exposed to operating pressures of up to 26 bar or 17 bar, depending on model.
  • High-Performance cooling assemblies.
  • The heat is transferred from the medium to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits.
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50%of antifreeze and anticorrosive additives [other media available at request].
  • Hydraulic motor powered fan.


AKG-Line HR Oil cooler anti-clogging fins hydraulic motor

FEATURES OF THE AKG-Line HR

  • The coolers are equipped with anti-clogging fins
  • Hydraulische motor powered fan.
  • Can be exposed to operating pressures of up to 26 bar or 17 bar, depending on model
  • High-Performance cooling assemblies
  • The heat is transferred from the medium to be cooled to the ambient air
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50 per cent of antifreeze and anticorrosive additives [other media available]


AKG-Line HY Oil cooler with bypass hydraulic motor

FEATURES OF THE AKG-Line HY

  • Oilcooler with BYPASS
  • AC-motor Hydraulic motor powered fan.
  • Can be exposed to operating pressures of up to 26 bar or 17 bar, depending on model.
  • High-Performance Aluminum cooling assemblies.
  • The heat is transferred from the medium to the ambient air.
  • Cooler can be universally used in hydraulic oil, transmission oil, engine oil, lubricating oil and coolant circuits.
  • For the cooling of mineral oil, synthetic oil, biological oil as well as of HFA, HFB, HFC and HFD liquids and water with at least 50% of antifreeze and anticorrosive additives [other media available at request].